CERTIFIED RECONDITIONED -
NEXT GENERATION - PROGRAMMED
Owner’s Manual
Read and save these instructions
Vita-Mix® Corporation
8615 Usher Road
* Product image may differ slightly from
your configuration
Cleveland, OH 44138-2103 U.S.A.
1.800.848.2649 / 1.440.235.4840
vitamix.com
LET’S GET STARTED
Congratulations!
You are about to see how quick, easy, and delicious healthy eating can be!
Please read all the safety information, warnings, and instructional material found
in this booklet before getting started. Set your Vitamix machine on a dry, level
surface. Make sure that the power switch is set to Off, and that the machine is
plugged into a grounded electrical outlet. Then, follow the cleaning instructions
on page 22 to prepare your machine for use. Always clean your machine before
the first use.
3
SERVICE AND REGISTRATION
Vitamix Service
Record the model number and serial number of your Vitamix in the spaces
provided below for future reference. These numbers can be found on the back of
the motor base.
Model Number
Serial Number
Date of Purchase
Purchased From
Before returning this product for any reason, including repair, first contact Vitamix
Customer Service at 1.800.848.2649 or 1.440.235.4840, email service@vitamix.
com, or contact your local dealer.
Product Registration
Your reconditioned Vitamix® machine was purchased directly from the Vita-Mix®
Corporation. Your product was registered at the time of purchase and the machine’s
warranty has been activated.
4
IMPORTANT SAFEGUARDS
WARNING: To avoid the risk of serious injury when using your
Vitamix® blender, basic safety precautions should be followed, including
the following.
READ ALL INSTRUCTIONS, SAFEGUARDS, AND
WARNINGS BEFORE OPERATING BLENDER.
1. Read all instructions.
2. Not intended for use by or near children or persons with reduced physical,
sensory, or mental capabilities or lack of experience and knowledge. Close
supervision is necessary when any appliance is used by or near children or
incapacitated persons.
3. To protect against the risk of electrical shock, do not put the blender base in
water or other liquid.
4. Unplug from outlet when not in use, before putting on or taking off parts, and
before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Call
Vitamix Customer Service at 1.800.848.2649 or 1.440.235.4840 or email
or mechanical adjustment. If purchased outside the U.S.A. or Canada, contact
your local Vitamix dealer.
7. Alteration or modification of any part of the blender base or container,
including the use of any part or parts that are not genuine authorized Vitamix
parts, may cause fire, electric shock, or injury.
8. The use of attachments not expressly authorized or sold by Vitamix for use
with this blender, including canning jars, may cause fire, electric shock, or
injury.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter.
11. Do not let cord contact hot surface, including the stove.
12. Keep hands and utensils out of container while blending to reduce the risk
of severe injury to persons or damage to the blender. A rubber scraper or
spatula may be used, but only when the Vitamix blender is not running.
13. The tamper provided must be used only when the main part of the lid is
in place.
5
IMPORTANT SAFEGUARDS
14. Blades are sharp. Handle or remove blade and blade assembly from the
container with extreme care to avoid injury. To reduce the risk of injury, never
place a blade assembly on the motor base unless assembled to the Vitamix
container.
15. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in
the container as this will damage the blades and other components when
starting the machine and may cause injury.
16. Never attempt to operate with damaged blades.
17. Always operate blender with lid and lid plug firmly in place. The lid plug
should be removed only when adding ingredients and when using the tamper.
18. When blending hot liquids or ingredients, use caution; spray or escaping
steam may cause scalding and burns. Do not fill container to the maximum
capacity. Always begin processing on the lowest speed setting, variable
speed 1. Keep hands and other exposed skin away from the lid opening to
prevent possible burns.
19. When making nut butters or oil-based foods, do not process for more than
one minute after the mixture starts to circulate in the container. Processing
for longer periods can cause dangerous overheating.
SAVE THESE INSTRUCTIONS
WARNING
To Avoid Injury.
Read and understand instruction
manual before using this machine.
IMPORTANT INSTRUCTIONS FOR SAFE USE
This product is intended for HOUSEHOLD USE ONLY and is not intended to be
used for commercial purposes.
Do not leave your Vitamix blender unattended when operating.
Any repair, servicing, or the replacement of parts must be performed by Vitamix
or an authorized service representative.
6
IMPORTANT SAFEGUARDS
WARNING
Electrical Shock Hazard.
Use grounded outlet only.
DO NOT remove ground.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to follow instructions can cause death
or electrical shock.
NOTICE: THE FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS
AND THE IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR
VITAMIX BLENDER THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK
OF SERIOUS INJURY.
7
PARTS AND FEATURES
Lid Plug
2-Part Lid
Lid Flaps
Blade Assembly
Container
Retainer Nut
Drive Socket
Centering Pad
Start / Stop Switch
Pulse Switch
Motor Base
Variable Speed Dial
Tamper
* Product image may differ slightly from your configuration
8
PARTS AND FEATURES
On / Off Switch: The On / Off (or Power) Switch is on the right-hand side of the
machine base. The On / Off Switch controls the power to the machine.
Start / Stop Switch: Pressing down on the Start / Stop Switch will initiate the
blending process. Pressing down on the Start / Stop Switch again will stop the
blending process.
Variable Speed Dial: The center Variable Speed Dial serves two functions; the
use of five programs or the use of ten variable speed settings.
Pulse Switch ( ): The Pulse Switch can be used when using Variable Speeds
or Programs.
Container: Ounces, cups, and milliliters are clearly marked.
2-Part Lid: The 2-part Lid is easy to put on and take off and easy to clean.
Always use the lid and the lid plug when the machine is in operation.
CAUTION: Lids and tampers are not interchangeable between different
container styles, types, and sizes.
Snap the lid onto the container and leave in place for a few minutes. Once the lid
has been left on the container, it will be much easier to lock or remove.
Lid Plug: Insert through the lid and secure by turning clockwise. Remove the lid
plug to use the tamper or add ingredients.
Tamper: The tamper allows you to accelerate the process of very thick and / or
frozen mixtures that cannot be processed in a regular blender. Using the tamper
maintains circulation by preventing air pockets from forming.
WARNING
Rotating Blades Can
Cause Severe Injury.
DO NOT reach into container
while machine is running.
9
PARTS AND FEATURES
To Lock the Lid in Place: Position lid on container with lid flaps midway between
the spout and the handle. Push the lid onto the container until it locks in place. The
lid must always be secured when processing, especially hot liquids that may scald.
Never operate the blender without checking to make sure the lid is securely
locked in place.
To Remove the Lid: Lift up on one lid flap while holding the container securely.
To Remove the Lid Plug: Rotate the lid plug counterclockwise from the “locked” to
“unlocked” position and lift out.
Front
Power Cord: Your machine is equipped
with a long power cord. Store the
unused portion neatly underneath.
Bottom View / Cord Wrap: Plastic cord
retainers hold the cord securely. They
are flexible, and return to position after
the cord is lifted out.
On/Off
Switch
Back
10
CONTROL PANEL
5
4
1
3
2
1. On / Off Switch: The On / Off (or Power) Switch is located on the lower
right-hand side of the machine. The On / Off Switch controls the power to
the machine.
BEFORE moving the On / Off Switch to the On (I) position, make sure the
marker on the Variable Speed Dial is pointed at the Stop Symbol ( ) at
the top of the dial.
After plugging in the unit, move the On / Off Switch to the On position
to ready the machine for blending. Move the On / Off Switch to the Off
position at night and whenever the machine will be left unattended.
If the On / Off switch is moved to the Off position to stop a program mid-
cycle, wait 30 seconds for power to recycle and the timer to reset before
moving the On / Off switch to the On position.
When the Pulse, Start / Stop, and Program Symbols brighten, the On / Off
Switch is in the On position and power is flowing.
2. Start ( ) / Stop ( ) Switch: After the marker on the Variable Speed Dial is
rotated off of the Stop Symbol ( ) to either Variable Speed 1 or a Program
setting, press the Start / Stop Switch to start the machine and initiate
the blending process. Pressing the Start / Stop Switch again will stop the
blending process.
Programs can be interrupted by pushing down the Start / Stop switch
at any time. If reactivated by pushing down the Start / Stop switch, the
program will start at the beginning.
11
CONTROL PANEL
CAUTION
Never Start on Speeds Above 1 with
Hot Liquids to Avoid Possible Burns.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid and lid plug
securely in place prior to operating
the machine.
Always start on Variable 1, slowly increase
to 10.
3. Pulse Switch ( ): Variable Speed: Pressing down on the Pulse Switch will
cause the machine to blend at the speed setting shown on Variable Speed
Dial for as long as the Pulse Switch is held down.
Programs: The Pulse function can be used when a program is selected.
Pushing down the Pulse switch when a program is selected will cause the
machine to run at 50% of high power for as long as the Pulse switch is
pushed down.
4. Variable Speed Dial:
The Variable Speed Dial serves two functions; the use of five programs
settings or ten variable speed settings.
•
To use programs: rotate the Variable Speed Dial to the left to the desired
program.
•
To use Variable Speed:
a. Rotate the Variable Speed dial right to 1.
b. Press down on the Start / Stop switch.
c. Rotate the Variable Speed dial to the right or left during blending to
increase or decrease the speed of the blades.
d. At the end of the blending cycle, rotate the marker on the Variable
Speed dial back to the Stop Symbol ( ) at the top of the dial.
5. Programs:
Your Vitamix is equipped with five program settings for the most commonly
used recipes. Rotating the Variable Speed Dial left of center allows you
to select a program for Smoothies, Frozen Desserts, Soups, Purées, and a
Cleaning cycle. These programs are optimized for these recipe categories,
but may also work well with other recipe choices.
12
ABOUT THE BLADES
The Vitamix machine comes standard with the wet blade container. The blade
is identified by a “W” for wet. This blade is used for most of your recipes.
Additional containers with wet or dry blades may be purchased separately.
WARNING
Rotating Blades Can
Cause Severe Injury.
DO NOT reach into container
while machine is running.
Wet Blade Container: Designed for processing liquids,
including juice, frozen mixtures, sauces, soups, purees,
batters, and for wet chopping. The wet blades can also grind
grain and knead dough, but they are not quite as efficient as
the dry blades in this application. If used for grinding, your
container will mar and become cloudy; see instructions for
dry container use.
Dry Blade Container: These blades are clearly marked “D”
and are designed specifically for grinding dry materials such
as grains, cereal, and coffee, and are also used for kneading
bread dough. The dry blades can NOT process liquids
efficiently. If you grind herbs on a regular basis, you may
wish to purchase a separate dry blade container and replace
blades as needed.
CAUTION
Moving Parts
May Become
Hot With
Extended Use.
DO NOT touch.
13
TAMPER
CAUTION
Rotating Blades Can Cause Damage.
Lids and tampers are not interchangeable between
different container styles, types, and sizes. Use the
tamper that was supplied with your machine.
How to Determine the Tamper that Can Be Used with
Your Container
Each type of tamper is designed to be used safely and effectively with a particular
container. If a tamper came with your container, it is the correct tamper for
the container. If a tamper did not come with your container, or you want to
determine if a tamper that you already have can be used with your new container,
please compare your container with the containers and matching tampers to the
illustration below.
Before using the tamper during the blending process, verify that it is the
proper tamper.
•
•
•
64 oz. Short Containers use Tamper 016041 that is approximately
9-¾ inches long.
64 oz. Tall Containers uses Tamper 000760 that is approximately
12-½ inches long.
32 oz. and 48 oz. Containers use Tamper 015033 that is approximately
11 inches long.
14
TAMPER
To verify that you are using the correct tamper, place the lid on an empty
container, remove the lid plug and insert the tamper. If it is the correct tamper
it should easily fit into the opening but will not come in contact with the blades
no matter how you move the tamper inside the container. IF THE TAMPER
TOUCHES THE BLADES AT ANY ANGLE - DO NOT USE THE TAMPER WITH
YOUR CONTAINER.
If you do not have the correct tamper for your container, call Vitamix Customer
services at 1.800.848.2649 or 1.440.235.4840 or e-mail [email protected] to
order a new tamper. If purchased outside the United States or Canada, contact
your local Vitamix Dealer.
15
HOW TO USE THE TAMPER
WARNING
Rotating Blades Can
Cause Severe Injury.
•
DO NOT put hands, spatulas, etc.
in the container while the machine
is running or while the container is
still on the base.
•
Lids and tampers are not
interchangeable between different
container styles, types, and sizes.
Use the tamper that was supplied
with your machine.
IMPORTANT!
•
The splash disk (near the top of
the tamper) and lid prevent the
tamper from hitting the blades
when the lid is secured properly
in the locked position.
Tamper
Tamper
Splash Disk
Lid
•
•
•
The container should not
be more than two-thirds
full when the tamper is used
during blending.
To avoid overheating during
blending, DO NOT use the
tamper for more than 30
consecutive seconds.
If the food does not circulate, the
machine may have trapped an
air bubble. Carefully remove the
lid plug while making sure the
lid stays firmly in place. Release
the air bubble by inserting
the tamper through the lid
plug opening.
Blade Assembly
•
Holding the tamper straight down may not help the ingredients circulate.
If necessary, point the tamper toward the sides or corners of the container.
DO NOT try to force the tamper deeper into the container.
16
HINTS FOR SETTING SPEEDS
CAUTION
Never Start on Speeds Above 1 with
Hot Liquids to Avoid Possible Burns.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid and lid
plug securely in place prior to operating
the machine.
Always start on Variable 1, slowly increase
to 10.
Variable Speed
Before using the Variable Speed option, always begin with the Variable Speed Dial
marker pointed at the Stop Symbol ( ) at the top of the dial.
1. Rotate the dial right to Variable Speed 1.
2. To activate the blending process, press down on the Start / Stop Switch.
3. Slowly turn the Variable Speed Dial to the desired speed depending on the
recipe used.
4. At the end of the blending cycle, rotate the Variable Speed dial back to the
Stop Symbol ( ) at the top of the dial.
Use the highest setting called out in the recipe for as much of the processing
time as possible to make whole-food juices, soups, shakes, frozen mixtures,
purées, nut butters, and for grinding grains. Processing times will generally
be less than one minute (most take less than 30 seconds). Higher speed
provides the best quality of refinement, breaking down ice, frozen fruit,
whole fruits or vegetables, and grains to a smooth, lump-free consistency.
Blending too long at too low of a speed setting will overheat the
machine and cause the Automatic Overload Protection to turn off the
machine. Blending on higher speed maximizes the motor’s cooling fan to
avoid overheating.
If the mixture stops circulating, you may have trapped an air bubble. To resolve
Insert the tamper through the lid plug and stir until it “burps.” If this does not
work, press the On / Off switch to stop the motor. Remove the container
from the motor base, and use a rubber spatula to press the air bubble away
from the blades. Return the container to the motor base, replace the lid, and
continue blending.
17
HINTS FOR SETTING SPEEDS
Programs
Programs vary in blending speed and duration and will automatically stop at the
end of the program.
•
•
•
•
•
The Smoothie ( ) program runs for approximately 45 seconds.
The Frozen Dessert ( ) program runs for approximately 55 seconds.
The Hot Soup ( ) program runs for approximately 5 minutes 45 seconds.
The Purée ( ) program runs for approximately 1 minute.
The Cleaning ( ) program runs for approximately 1 minute.
18
OPERATING INSTRUCTIONS
Wet Blade Container
The Wet Blade Container is designed for processing liquids, including juice,
frozen mixtures, sauces, soups, purées, batters, and for wet chopping.
Before using this container for Programs or the Variable Speed option, always
begin with the Variable Speed Dial pointed at the Stop Symbol ( ) at the top of
the dial.
1. Move the On / Off switch to the On position.
2. Load the container before placing it on the motor base. Place liquids and
soft foods in the container first, solid items and ice last. Although not
necessary for blending, you may want to cut or break food into smaller
pieces for more precise measuring of ingredients.
3. Securely fasten the 2-part lid. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid plug opening).
Especially when blending hot ingredients, make sure that the lid is
securely latched.
4. With the motor off, set the wet blade container on the motor base by
aligning it over the centering pad. Do not ever attempt to put a container
on an operating motor base or to operate a motor base without a container
properly in place.
5. Use the Variable Speed dial to select a function.
•
•
Variable Speed - Rotate the dial right of center to Variable Speed 1.
Programs - Rotate the dial left of center to the desired program.
6. Activate the blades by pressing the Start / Stop Switch. Your container may
shift as it gets into an aligned position.
•
•
Variable Speed - slowly rotate the Variable Speed dial to the right to the
desired speed.
Programs - The programs vary in blending speed and duration and
will automatically stop at the end of the program. Programs can be
interrupted by pushing down the Start / Stop switch at any time. If
reactivated by pushing down the Start / Stop switch, the program will
start at the beginning.
7. If the mixture stops circulating, you may have trapped an air bubble. To
resolve Insert the tamper through the lid plug and stir until it “burps.” If
this does not work, press the On / Off switch to stop the motor. Remove
the container from the motor base, and use a rubber spatula to press the
air bubble away from the blades. Return the container to the motor base,
replace the lid, and continue blending.
19
OPERATING INSTRUCTIONS
8. Take proper care when handling and processing hot ingredients and
making hot soups and sauces.
CAUTION
Never Start on Speeds Above 1 with
Hot Liquids to Avoid Possible Burns.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid and lid
plug securely in place prior to operating
the machine.
Always start on Variable 1, slowly increase
to 10.
9. Due to the machine’s speed, processing times are much quicker than
standard appliances. Until you are accustomed to the machine, count your
time carefully to avoid over-processing.
10. After pressing the Start / Stop switch to stop the cycle, wait until the blades
stop completely before removing the lid or container from the motor base.
Dry Blade Container
Before using this container for programs or the Variable Speed option, always
begin with the Variable Speed Dial pointed at the Stop Symbol ( ) at the top of
the dial.
If purchased, your dry blade container should be used only for hard, dry materials,
such as grain, and for kneading dough.
1. Load the container before placing it on the motor base.
2. Securely fasten the 2-part lid. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid plug opening).
3. With the motor off, set the dry blade container on the motor base by
aligning it over the centering pad. Do not ever attempt to put a container
on an operating motor base or to operate a motor base without a container
properly in place.
4. To begin, make sure the On / Off switch is in the On position.
5. Use the Variable Speed dial to select a function.
•
•
Variable Speed - Rotate the dial right of center to Variable Speed 1.
Programs - Rotate the dial left of center to the desired program.
20
OPERATING INSTRUCTIONS
6. Activate the machine by pressing the Start / Stop Switch. Your container will
shift and get into an aligned position.
•
•
Variable Speed
desired speed.
-
slowly increase the Variable Speed to the
Programs - The programs vary in blending speed and duration and
will automatically stop at the end of the program. Programs can be
interrupted by pushing down the Start / Stop switch at any time. If
reactivated by pushing down the Start / Stop switch, the program will
start at the beginning.
21
CARE AND CLEANING
Container
To prepare your new machine for initial use, follow the steps under Normal
Cleaning below. This will clean the unit and break-in the motor.
Normal Cleaning
Before using the Variable Speed or Program options, always begin with the
Variable Speed Dial pointed at the Stop Symbol ( ) at the top of the dial.
1. Fill the container half full with warm water and add a couple drops of liquid
dish washing detergent to the container.
2. Snap or push the complete 2-part lid into the locked position.
3. Perform one of the following procedures:
•
Variable Speed:
a. Rotate the Variable Speed dial to 1.
b. Press the Start / Stop switch.
c. Slowly increase Variable speed to 10.
d. Run the machine for 30 to 60 seconds.
e. Rotate the Variable Speed dial to the Stop Symbol ( ) at the top of
the dial.
•
Program
a. Rotate the Variable Speed dial to the Cleaning ( ) program icon.
The Cleaning ( ) program will run for approximately 1 minute.
b. After the program stops, rotate the Variable Speed dial to the Stop
Symbol ( ) at the top of the dial.
4. Rinse and drain the container.
Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash parts in warm, soapy water. Rinse clean under
running water and dry. Reassemble before use.
IMPORTANT: To ensure continued and effective performance, do not put the
container, lid, lid plug or tamper in the dishwasher.
22
CARE AND CLEANING
Motor Base
1. Unplug the power cord.
WARNING
Electrical Shock Hazard.
Disconnect power before
cleaning machine.
Failure to follow instructions can
cause death or electrical shock.
2. Wash the outside surface with a damp, soft cloth or sponge that has been
rinsed in a mild solution of liquid detergent and warm water. Do not place
the motor base in water.
3. The centering pad can be removed for more thorough cleaning.
4. Thoroughly clean the switches so they work freely. They may become sticky
from use. Moisten a cotton swab with a household degreaser or cleaner and
clean the grooves around the switches. Immediately dry all surfaces.
5. Polish with a soft cloth.
23
TROUBLESHOOTING
Automatic Overload Protection
Your Vitamix machine is equipped with a special feature: Automatic Overload
Protection. This built-in feature is designed to protect the motor and prevent your
machine from overheating. When engaged, this Automatic Overload Protection
will cause the motor to shut off and possibly emit a light odor.
If your Automatic Overload Protection should ever be activated, refer to page 10
in this manual to easily reset your machine.
Tips to prevent “overloading” your Vitamix machine:
•
•
•
•
•
Process only Vitamix recipes when learning to use the machine
Do not process recipes at lower speeds than recommended
Do not process recipes at higher speeds than recommended
Do not process recipes longer than recommended
Use your tamper to process thicker mixtures and keep ingredients moving
around and through the blades
Retainer Nut Loosening
In the event that the retainer nut at the bottom of your container loosens and no
longer securely holds the blade assembly in place, DO NOT CONTINUE TO USE THE
CONTAINER. Call Vitamix Customer Service at 1.800.848.2649 or 1.440.235.4840,
or your local dealer immediately for instructions.
24
WARRANTY
Full 5-Year Reconditioned Machine Warranty
1. PRODUCT REGISTRATION.
Vita-Mix® Corporation (“Vitamix”) strongly encourages you to register your
purchase by completing and returning the product registration card that came
with this Machine. You can register online at vitamix.com/warranty; or by calling
our Customer Service Department at 1.800.848.2649 or 1.440.235.4840. Failure
to register your product purchase will not diminish your warranty rights. However,
registering your purchase will allow Vitamix to better serve you with any of your
customer service needs.
2. WHO CAN SEEK WARRANTY COVERAGE.
This Warranty is extended by Vitamix to the owner of this Machine for personal
household use only. This Warranty does not apply to products used for
commercial, rental or re-sale purposes. Should ownership of the machine change
during the 5-year period, please update the Machine’s owner information at
vitamix.com/warranty.
3. WHAT IS COVERED.
Vitamix warrants to the owner that if this Machine (a “Machine” consists of
a motor blender base and any containers purchased together) fails within 5
years from the date of purchase due to a defect in material or workmanship or
as a result of normal wear and tear from ordinary household use, Vitamix will,
within 30 days of receipt of the returned product, repair the failed Machine or
component part of the Machine free of charge.
If, in Vitamix’s sole discretion, the failed Machine or component part of the
Machine cannot be repaired, Vitamix will elect to either (A) replace the Machine
free of charge or (B) refund the full purchase price to the owner, unless Vitamix
receives prior written notice of the owner’s preference.
4. WHAT IS NOT COVERED.
This Warranty does not apply to Machines that have been used commercially or
in non-household applications. This Warranty does not cover cosmetic changes
that do not affect performance, such as discoloration or the effects of the use
of abrasives or cleaners or food build up. This Warranty is only valid if the
Machine is used and maintained in accordance with the instructions, warnings
and safeguards contained in the owner’s manual.
Vitamix will not be responsible for the cost of any unauthorized warranty repairs.
25
WARRANTY
REPAIR, REPLACEMENT OR REFUND OF THE PURCHASE PRICE ARE THE
EXCLUSIVE REMEDIES OF PURCHASER AND THE SOLE LIABILITY OF
VITAMIX UNDER THIS WARRANTY. NO EMPLOYEE OR REPRESENTATIVE
OF VITAMIX IS AUTHORIZED TO MAKE ANY ADDITIONAL WARRANTY OR
ANY MODIFICATION TO THIS WARRANTY WHICH MAY BE BINDING UPON
VITAMIX. ACCORDINGLY, PURCHASER SHOULD NOT RELY UPON ANY
ADDITIONAL STATEMENTS MADE BY ANY EMPLOYEE OR REPRESENTATIVE
OF VITAMIX. IN NO EVENT, WHETHER BASED ON CONTRACT, INDEMNITY,
WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR
OTHERWISE, SHALL VITAMIX BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT
LIMITATION, LOSS OF PROFIT OR REVENUE.
Some states do not allow limits on warranties. In such states, the above
limitations may not apply to you. Outside the U.S.A. and Canada, other
warranties may apply.
5. WHAT VOIDS THIS WARRANTY.
Abuse, misuse, negligent use, alteration of the Machine, exposure to abnormal
or extreme conditions, or failure to follow the operating instructions will void
this Warranty.
The Warranty is also void if repairs to the Machine or any component part
of the Machine are performed by someone other than either Vitamix or an
authorized Vitamix Service Provider or if any component part of a Machine
subject to this Warranty is used in combination with a motor base or container
that is not expressly authorized by Vitamix.
6. HOW TO OBTAIN RETURN AUTHORIZATION UNDER THIS WARRANTY.
In the event that the Machine or any component part of the Machine needs
service or repair, please call Vitamix Customer Service at 1.800.848.2649 or
1.440.235.4840. You will be asked to provide a date of purchase and proof
of purchase for any product that has not been registered with Vitamix.
For product subject to this Warranty you will be provided with a return
authorization number, up-to-date shipping instructions and a pre-paid return
pick up label. Vitamix will pay standard shipping costs on the return of a
Machine or component part for warranty service and repair and for return
shipment of the product to you after the warranty repair or replacement.
Purchaser is responsible for the costs of special shipping requests.
26
WARRANTY
Within the U.S.A., this Warranty is honored directly through the
Vita-Mix® Corporation.
Vita-Mix® Corporation
8615 Usher Road
Cleveland, Ohio 44138-2199
1-800-848-2649
You will be deemed to have accepted the returned product “as is” upon delivery
unless you notify Vitamix of any problem, including shipment damage, within 48
hours of delivery.
SPECIAL INTERNATIONAL INSTRUCTIONS
If a machine was purchased within the U.S.A. or Canada, but is currently outside
the U.S.A. or Canada, all shipping and resulting taxes and duties are at the owner’s
expense. Call +1.440.235.4840 or email [email protected] for more details.
27
SPECIFICATIONS
Certified Reconditioned Next Generation Programmed
Motor:
2.2 peak output horsepower motor
Electrical:
120 V, 50 / 60 Hz, 12 A
Uses a U.S.A. three–prong grounded cord
Dimensions:
Height: 17.4 in. / 44,2 cm
Width: 7.7 in. / 19,6 cm
Depth: 9.4 in. / 23,9 cm
When applicable:
To see the complete line of Vitamix® products,
visit vitamix.com.
Vita-Mix® Corporation
8615 Usher Road
Cleveland, OH 44138-2103 U.S.A.
1.800.848.2649 / 1.440.235.4840
vitamix.com
©2013 Vita-Mix® Corporation. No part of this publication may be reproduced or
transmitted in any form or by any means or stored in a database or retrieval system
without the written permission of the Vita-Mix® Corporation.
104276 4 / 13
Printed in the U.S.A.
|